RESIDENTIAL & COMMERCIAL SKIPS

Roll on / roll offs

Same day service

Wait & Load

4, 6, 8, 12 Yards skips

How Skip Permits Work in Richmond upon Thames

If you want to place a skip on a public road or highway in Richmond upon Thames, you must obtain a skip licence from the Council.

If the skip is placed entirely on private land (driveway, garden, site) then you do not need the licence.

Below is the full process and key rules.

Hire a Richmond upon Thames Skip

1. Who Applies for the Permit?
faq arrow icon to expand accordian
  • Only a registered skip hire company may apply for the skip licence in Richmond upon Thames.
  • As the person booking the skip, you must ensure you choose a licensed operator and that the licence is approved before the skip is placed.
2. How Long Does a Permit Last?
faq arrow icon to expand accordian
  • The licence is valid for a maximum period of three weeks (21 days).
  • If you need the skip beyond that period, you must apply for a renewal.
3. How Much Does the Permit Cost? 
faq arrow icon to expand accordian
  • Skip Permit: £100.50 – 21 days.
  • If the skip is placed in a Controlled Parking Zone (CPZ) bay:
    • Additional administration charge: £155.40 for the duration of the licence.
    • Plus, a daily charge for the bay (varies by CPZ zone). – Category 1 (£57.46 per bay per day) – Category 2 ( £36.85 per bay per day) – Category 3 ( 14.67 per bay per day) + Admin Fee £155.40

All prices exclude VAT

4. Where Can You Put the Skip?
faq arrow icon to expand accordian
  • On the public highway / road carriageway → licence required.
  • On private land (your driveway, garden, private site) → no licence required.
  • If placing in a CPZ bay/parking bay, the skip operator must arrange the corresponding parking bay suspension or incorporate the bay charge.
5. Safety Requirements 
faq arrow icon to expand accordian
  • The skip placement must comply with the licence terms and conditions (markings, lighting, safe siting).
  • The skip must be properly signed with the operator’s name and contact number.
  • Must not obstruct drainage, pedestrian paths, or cause hazard to traffic.
6. Permit Enforcement
faq arrow icon to expand accordian
  • Any skip on the highway without a valid skip licence may be subject to formal enforcement by the council.
  • The council’s inspectors check skip licences and can remove/un‐authorise skips placed illegally.
7. How Long Does Approval Take? 
faq arrow icon to expand accordian
  • For non-CPZ placements: licence effective from the date it is issued; processing may take up to 3 working days.
  • For skips in NPZ/CPZ bays: they require 3 working days to process + 7 full days to display signs for parking suspensions.
8. How the Process Usually Works for You
faq arrow icon to expand accordian
  1. You book a skip with a registered/licensed skip-hire company in Richmond upon Thames.
  2. Inform the company that the skip will be placed on a public road/highway (if applicable).
  3. The skip hire company:
    • Applies for the skip licence via Richmond Council.
    • If required, arranges CPZ parking bay suspension (management of additional fees).
    • Waits for licence issuance.
  4. Once the licence is approved, the skip is delivered.
  5. You fill the skip, respecting waste restrictions and safe usage.
  6. The skip is collected before the licence period ends, or the operator applies for renewal if needed.

 

Skip Hire in Richmond | Book Online Today | Proskips

Richmond Council – How Skip Permits Work ?

Hire a Richmond upon Thames Skip

Get a Quote

Get a quote

Or book today. Call 020 3553 6139

"*" indicates required fields

This field is for validation purposes and should be left unchanged.